Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

T1 check

T1 check

hi,

i have 2 sites connected by 2 t1's through a converter

ROUTER<---->converter(RAD IMAXI-4)<--------->2T1's<------------>converter(RAD IMAXI-4)<---->ROUTER

i seem like i am not getting 3MB bandwidth as i supposed to get.

i want to make a sterile test, disconnect the routers and instead connect 2 pc's (i case i have some problems with the config) on each site

PC<---->converter(RAD IMAXI-4)<--------->2T1's<------------>converter(RAD IMAXI-4)<---->PC

now:

1. is the command "PING 1.1.1.1 -l 3000 -t" good reference to check that the that the T1's OK and i am getting 3MB bandwidth?

are the PC really generates 3MB packets and sends them?

how is ,packet wise,the ping command on PC works?

Is it a good reference?

2. What programs can i use to test that the T1's OK and i am getting 3MB bandwidth?.

3.Let say i don't have programs to help me, what kind of testes or checks (with my PC ) can i do to see that the T1's OK and i am getting 3MB bandwidth? (like downloading a file from one PC to another).

?????

6 REPLIES
Bronze

Re: T1 check

Community Member

Re: T1 check

hi,

any more ideas?

Hall of Fame Super Gold

Re: T1 check

iperf is indeed the most immediately available tool for bandwidth measurements.

Community Member

Re: T1 check

OK,

i am on vacation as soon as i get back i will try it in my lab.

but for now i need something simple, to guide someone to use it.

Community Member

Re: T1 check

hi,

i tried to use IPerf.

and i am kind of lost.

let say i have 2 PC's in MY LAN or i put 2 PC'a from each side of a T1, and i want to see what is the maximum bandwidth i have in each direction how should i config the iperf or Jperf to do TCP and UDP check and what results should i expect?

Super Bronze

Re: T1 check

I like TTCP since it behaves as a TCP flow should but pushes to max rate. Also I like that you can use Cisco routers as a sink (if you send to the TCP discard port [if enabled]).

193
Views
0
Helpful
6
Replies
CreatePlease to create content