Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

T1 PRMs (Performance Report Messaging) supported?

Are the CSU modules in Cisco routers compliant with ANSI T1.403 or ITU G.703 specification for reporting T1 FEND (far end) performance data? This works by collecting layer 1 and layer 2 data on the CRC-6, framing, bi-polar violations, etc, and sending this back upstream over the FDL (facility data link) on any ESF T1 circuit. We are interested in collectiong these stats in our DACS (digital access cross-connect system) for aggregation on reporting.

Thanks.

1 REPLY
Silver

Re: T1 PRMs (Performance Report Messaging) supported?

you may have to check out the router's specification sheet for this. check out the following link for MicroRouter 2220R and 2270R Specification Sheet(the CSU models are compliant with ANSI T1.403 or ITU G.703 specification) :

http://www.cisco.com/en/US/products/hw/routers/ps4081/products_white_paper09186a008009480d.shtml

151
Views
0
Helpful
1
Replies