Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

T1 Usage

I have a Cisco 2811 and we are trying to solve a bandwidth usage problem. Is there a way to determine what host IP is using all the bandwidth on the Serial port?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: T1 Usage

Allen

Probably the easiest way to determine that is to configure NetFlow on the router. NetFlow will generate statistics that will identify addresses, protocols, and amount of traffic. It would be especially interesting to configure the option in NetFlow to identify the Top Talkers. This link has information about this:

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00805e11ab.html

It seems that it would be just what you need.

HTH

Rick

2 REPLIES
Hall of Fame Super Silver

Re: T1 Usage

Allen

Probably the easiest way to determine that is to configure NetFlow on the router. NetFlow will generate statistics that will identify addresses, protocols, and amount of traffic. It would be especially interesting to configure the option in NetFlow to identify the Top Talkers. This link has information about this:

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00805e11ab.html

It seems that it would be just what you need.

HTH

Rick

Hall of Fame Super Silver

Re: T1 Usage

Allen

I am glad that my suggestion was helpful. Thank you for using the rating system to indicate that your question was resolved (and thanks for the rating). It makes the forum more useful when people can read about a question and can know that they will read a response that resolved the question.

I encourage you to continue your participation in the forum.

HTH

Rick

93
Views
5
Helpful
2
Replies