Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

TACACS Important

I was configuring tacacs authorization for a cisco router. Device got blocked now. I cant enter any commands now. Its throwing the error message "Command Authorization failed"

i want an option to get the device up and working now. box is 3750.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: TACACS Important

If config is not saved, Please reload it so that it comes back without TACACS config.

This error is related to AAA authorization not being enabled on the switch.

When you try to config again, Please also put a fallback mode to local authentication and authorization. What would have happened is that you have only enabled authentication with the AAA authorization. Please enable authentication along authorization.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_44_se/configuration/guide/swauthen.html#wp1044243

HTH,

-amit singh

1 REPLY
Cisco Employee

Re: TACACS Important

If config is not saved, Please reload it so that it comes back without TACACS config.

This error is related to AAA authorization not being enabled on the switch.

When you try to config again, Please also put a fallback mode to local authentication and authorization. What would have happened is that you have only enabled authentication with the AAA authorization. Please enable authentication along authorization.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_44_se/configuration/guide/swauthen.html#wp1044243

HTH,

-amit singh

100
Views
0
Helpful
1
Replies