11-16-2006 04:17 AM - edited 03-03-2019 02:44 PM
Hi,
Please help me to configure the router TCP/ IP over X25 (RFC 1598) on serial or Ethernet
Dinesh
11-16-2006 04:59 AM
Hi
This could be a good starting point:
http://www.cisco.com/en/US/tech/tk713/tk730/technologies_configuration_example09186a0080093c0d.shtml
Hope this helps
11-19-2006 10:03 PM
Hi,
Thanks for reply. It is not help me, please suggest any alternative
Dinesh
11-19-2006 10:40 PM
11-20-2006 01:21 AM
Hi Dinesh
I don't have Visio. Can you post diagram in alternative format?
11-20-2006 01:38 AM
11-20-2006 02:28 AM
Hi
Now I see you are looking for X.25 over TCP/IP. Please, check following:
http://www.cisco.com/en/US/tech/tk713/tk730/technologies_configuration_example09186a0080093c0e.shtml
Hope this helps
11-20-2006 02:46 AM
Hi,
this is for XOT and i am looking for revers
Dinesh
11-20-2006 12:31 PM
Hi Dinesh ,
Please check the below link for TCP over x25.
http://www.cisco.com/warp/public/133/tcp_over_x25.html
Some useful links.
http://www.cisco.com/en/US/tech/tk713/tk730/tsd_technology_support_protocol_home.html
Hope it helps you.Plz rate it.
Thanks,
satish
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: