11-16-2006 04:17 AM - edited 03-03-2019 02:44 PM
Hi,
Please help me to configure the router TCP/ IP over X25 (RFC 1598) on serial or Ethernet
Dinesh
11-16-2006 04:59 AM
Hi
This could be a good starting point:
http://www.cisco.com/en/US/tech/tk713/tk730/technologies_configuration_example09186a0080093c0d.shtml
Hope this helps
11-19-2006 10:03 PM
Hi,
Thanks for reply. It is not help me, please suggest any alternative
Dinesh
11-19-2006 10:40 PM
11-20-2006 01:21 AM
Hi Dinesh
I don't have Visio. Can you post diagram in alternative format?
11-20-2006 01:38 AM
11-20-2006 02:28 AM
Hi
Now I see you are looking for X.25 over TCP/IP. Please, check following:
http://www.cisco.com/en/US/tech/tk713/tk730/technologies_configuration_example09186a0080093c0e.shtml
Hope this helps
11-20-2006 02:46 AM
Hi,
this is for XOT and i am looking for revers
Dinesh
11-20-2006 12:31 PM
Hi Dinesh ,
Please check the below link for TCP over x25.
http://www.cisco.com/warp/public/133/tcp_over_x25.html
Some useful links.
http://www.cisco.com/en/US/tech/tk713/tk730/tsd_technology_support_protocol_home.html
Hope it helps you.Plz rate it.
Thanks,
satish
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide