Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

TDM cross-connect for 1721

Hi all

I have a router 1721 with:

IOS VERSION 12.3(1a)

32K bytes of non volatile configuration memory

32768K bytes of processor board system flash (read/write)

and two cards VWIC-1MFT-G703

(not second generation cards VWIC2-1MFT G703)

In the configuration for E1 drop and insert, i have not the command tdm-group in (config-controller)#

but this is necessary for the command connect!

Any Help for this please?

Tks

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: TDM cross-connect for 1721

3 REPLIES
Silver

Re: TDM cross-connect for 1721

The channel-group 0 command is configured in such a way that the service provider can send Frame Relay link management information (LMI) on the T1 or E1 controller for Frame Relay data services.Refer URL

http://www.cisco.com/en/US/products/hw/routers/ps221/prod_configuration_guide09186a00800a4063.html#wp93759

Silver

Re: TDM cross-connect for 1721

New Member

Re: TDM cross-connect for 1721

thank you very much for your help on this problem. I believe this is the correct answer

TKS

170
Views
0
Helpful
3
Replies
CreatePlease to create content