Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Telnet into specific VTY lne

I'm having a problem telnetting to a specific VTY line. I thought they were available on ports 3001 onwards, but no joy. I cannot find it in the documentation. This is what is happening:

<code>

R3#telnet 172.16.105.1

Trying 172.16.105.1 ... Open

R5#show run | sec line

line con 0

exec-timeout 0 0

privilege level 15

logging synchronous

line aux 0

exec-timeout 0 0

privilege level 15

line vty 0 4

exec-timeout 0 0

privilege level 15

no login

R5#exit

[Connection to 172.16.105.1 closed by foreign host]

R3#telnet 172.16.105.1 3001

Trying 172.16.105.1, 3001 ...

% Connection refused by remote host

R3#

</code>

Where am I going wrong?

Kevin Dorrell

Luxembourg

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Telnet into specific VTY lne

Hi Kevin,

You need to use the rotary command under the VTY line(s), by default all the VTY lines are used sequentially via port 23 (the first free one is used), you can define a rotary group under specific VTY line(s) and use the defined number + 3000 to telnet to this specific line.

BR,

Mohammed Mahmoud.

5 REPLIES
Silver

Re: Telnet into specific VTY lne

kevin

As i know that works with the access server.

For telnet only 23 port works.

regards

shivlu

Re: Telnet into specific VTY lne

Hi Kevin,

You need to use the rotary command under the VTY line(s), by default all the VTY lines are used sequentially via port 23 (the first free one is used), you can define a rotary group under specific VTY line(s) and use the defined number + 3000 to telnet to this specific line.

BR,

Mohammed Mahmoud.

Re: Telnet into specific VTY lne

Thank you Mohammed, it was exactly that.

Kevin Dorrell

Luxembourg

Re: Telnet into specific VTY lne

Kevin,

You are very welcomed, and thank you very much for the rating.

BR,

Mohammed Mahmoud.

Blue

Re: Telnet into specific VTY lne

Interesting

225
Views
0
Helpful
5
Replies