Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Telnet to public ip via absolute line number

hello all

is it possible to telnet to public ip address assigned to cisco terminal server via absolute number.

eg. telnet 6.6.6.6 2033

where 6.6.6.6 is public ip and 2033 is my absolute line number.

as scenerion i have cisco terminal server setup. and 5 cisco router connected with terminal router via octal cable.

My requirement is, i wan to telnet from remote location and directly wanted to enter in to the respective router from given 5 routers.

anybody has idea please reply..

Thanks

Dhaval Tandel

2 REPLIES
Silver
Hall of Fame Super Bronze

Re: Telnet to public ip via absolute line number

Dhaval,

The command you posted should work and I tested here without problems.

From

http://www.cisco.com/warp/public/793/access_dial/comm_server.html

"Establish a Telnet connection to the IP address port to test direct connectivity. You must telnet from both an external device and the terminal server. For example, telnet 172.21.1.1 2003."

117
Views
0
Helpful
2
Replies