Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Testing 2

test

2 REPLIES
Purple

Traffic won't route without static route on client PC

Hi,

without adding the static route on the 10.10.10.10 server , could you show us its routing table to verify it has the ASA as default gateway. if so then on the ASA could you do a packet-tracer command like this:

packet-tracer input Inside tcp 10.10.10.10 2000 10.10.13.10 53 detailed

Post the output here.

Regards.

Alain

Don't forget to rate helpful posts.
Bronze

Traffic won't route without static route on client PC

Hi,

Try adding static routes to the 888's for routes to the 10.10.10.0/24 and 10.10.13.0/24 networks from the respective routers.

I can't explain why the routing doesn't work when you just rely on the default routes to handle the traffic, but I have seen this before.

Kind regards,

Paul

HTH Paul ****Please rate useful posts****
289
Views
0
Helpful
2
Replies
CreatePlease to create content