Am I correct that this output is from 3CDaemon (or perhaps 3Cserver)? I have used that software frequently with good success. So I am not confident that using a different TFTP server will necessarily solve your problem.
I find the output a bit difficult to interpret since it shows multiple transfers some of which are successful and some of which are not.
There is one error clearly shown which is about failure to overwrite a file. In the configuration of the TFTP server there is a checkbox for Allow overwirte of existing files. Check to see whether this check box is checked or not. The help file also indicates that if the file on the server is marked read only that you will get an error if you attempt to overwrite even if the check box is checked. So it might be useful to check on the permissions of the file on the server.
I am not clear whether the error code is related to the overwrite issue or not. I would suggest that you make a new attempt to write the file to TFTP, after restarting the TFTP server software so that the one attempt is the only thing showing in the TFTP server output.
Also it would be helpful to know what message you get on the router when the server generates this error code.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...