cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
285
Views
0
Helpful
1
Replies

Three ADSL Config.

m.salah
Level 1
Level 1

Hi,

I have two ADSL with outside Dynamic IP address and inside private IP address.

I have connected them on one switch has two VLANS (One for ADSL's and another for the FW) and I made a trunk to a router 1841 to do the routing, which has normal default routes to each ADSL Gateway.

The problem is, when I disconnect when of them, the internet goes down totally and the traffic never routed to the 2nd ADSL link.

What could be the problem? And how I achieve load balancing with the two IP addresses.

1 Reply 1

mheusinger
Level 10
Level 10

Hi,

you seem to need object tracking to achieve your goal. With object tracking you can define an object - f.e. ping to an internet server - based on which your routing takes one path or another if ping fails.

For technical details please refer to:

"Reliable Static Routing Backup Using Object Tracking"

http://www.cisco.com/en/US/products/sw/iosswrel/ps5413/products_feature_guide09186a00801d862d.html

Hope this helps! Please rate all posts.

Regards, Martin

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: