Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Bronze

throughput estimation

i have a 100Mb ethernet WAN connection between two sites. I'd like to calculate the throughput. I was trasferring some a 50Mb file over the link and only getting 70,000 bytes per second.

5 REPLIES

Re: throughput estimation

well 70,000 bytes per sec would

68KBps

something seems wrong

Bronze

Re: throughput estimation

Yes, we are currently transferring a 900M file and it is estimating 4 hours to finish.

Super Bronze

Re: throughput estimation

No duplex errors along the path?

What's the end-to-end latency?

Bronze

Re: throughput estimation

I think that could be the problem but I am not sure. The other end where the server is connected, the interface to auto/auto because that is how the vendor wants it. So it is actually showing at 100 half with tons of collisions.

Bronze

Re: throughput estimation

the problem is definetely with the server interface on the switch. I just tried using a different server that is configured for hard coded 1G/full and the performance is much better.

306
Views
3
Helpful
5
Replies
CreatePlease to create content