Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Time base Qos

I have configured and applied Qos successfully on my router,the following is the configuration.

class-map match-any HTTP_TRAFFIC

match protocol http

match protocol secure-http

class-map match-any ftp-traffic

match protocol ftp

class-map match-any nbar-discovery

match protocol fasttrack

match protocol edonkey

match protocol gnutella

match protocol winmx

class-map match-any GARBAGE

match protocol h323

match protocol cuseeme

match protocol vdolive

class-map match-any ALL_TRAFFIC

match class-map HTTP_TRAFFIC

match class-map ftp-traffic

match class-map nbar-discovery

match class-map GARBAGE

match class-map class-default

!

!

policy-map PRIORITY

class HTTP_TRAFFIC

bandwidth 2560

class ftp-traffic

bandwidth 1024

class nbar-discovery

bandwidth 20

class GARBAGE

drop

class class-default

fair-queue

policy-map SHAPE_4096

class ALL_TRAFFIC

shape average percent 100

service-policy PRIORITY

policy-map blocking_P2P

class nbar-discovery

police cir 40500

conform-action transmit

exceed-action drop

class GARBAGE

drop

class HTTP_TRAFFIC

police 2560000

class ftp-traffic

police cir percent 25

Now i want that Qos applied only for office timings. how can i do that.

1 REPLY
Hall of Fame Super Gold

Re: Time base Qos

Use time-based ACL.

http://www.cisco.com/en/US/docs/ios/12_0t/12_0t1/feature/guide/timerang.html

Hope this helps, please rate post if it does!

111
Views
0
Helpful
1
Replies
CreatePlease to create content