Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Timeout time? FTP issues

Hi everyone do i need to set timeout time on an inspection command and how long it should be set at?

ip inspect name SDM cuseeme

ip inspect name SDM dns

ip inspect name SDM ftp

ip inspect name SDM h323

ip inspect name SDM icmp

ip inspect name SDM imap

ip inspect name SDM netshow

ip inspect name SDM rcmd

ip inspect name SDM realaudio

ip inspect name SDM rtsp

ip inspect name SDM esmtp

ip inspect name SDM sqlnet

ip inspect name SDM streamworks

ip inspect name SDM tcp

ip inspect name SDM udp

ip inspect name SDM vdolive

For example if I am having issues with ftp downloads timing out I tried (below) but ftp sessions still time out ... any ideas?

ip inspect name SDM ftp timeout 3600 ?

Thank you

1 REPLY
Silver

Re: Timeout time? FTP issues

If you specify a timeout for any of the transport-layer or application-layer protocols, the timeout will override the global idle timeout for the interface to which the set of inspection rules is applied.If the protocol is TCP or a TCP application-layer protocol, the timeout will override the global TCP idle timeout. If the protocol is UDP or a UDP application-layer protocol, the timeout will override the global UDP idle timeout.If you do not specify a timeout for a protocol, the timeout value applied to a new session of that protocol will be taken from the corresponding TCP or UDP global timeout value valid at the time of session creation.

152
Views
0
Helpful
1
Replies
CreatePlease to create content