03-31-2009 08:24 AM - edited 03-04-2019 04:10 AM
All,
Is there any command on cisco router/switch/FW to add latency? Or is there a freeware running on a dual NIC windows box to add network latency?
Currently our application is running at 3ms delay environment, we want to see if it can support 10ms.
Thanks,
Solved! Go to Solution.
03-31-2009 08:56 AM
Hello Yuhui,
I used some years ago a tool from shunra to emulate a satellite link with a PC with two NICs
http://www.shunra.com/free-trials.php
other possible choices exist on the net
for example
http://www.download32.com/wan-emulator-i37489.html
Hope to help
Giuseppe
03-31-2009 08:56 AM
Hello Yuhui,
I used some years ago a tool from shunra to emulate a satellite link with a PC with two NICs
http://www.shunra.com/free-trials.php
other possible choices exist on the net
for example
http://www.download32.com/wan-emulator-i37489.html
Hope to help
Giuseppe
03-31-2009 09:26 AM
Always used IPERF, brilliant little tool. There is also a GUI based version called JPERF thats run's on Java.
Recommend them both.
http://code.google.com/p/xjperf/
Regards
03-31-2009 12:55 PM
have a look at Wanem .. its an open source software and very easy to setup
HTH
Narayan
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: