Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

track num rtr missing

Hello guys,

I have a switch WS-C3560G-48TS.

The version of IOS is:

WS-C3560G-48TS     12.2(58)SE2           C3560-IPSERVICESK9-M

The command "track number rtr" is missing. There are just three options there:

#track 10 ?

  interface  Select an interface to track

  ip         IP protocol

  list       Group objects in a list

Why is that so and where is rtr?

I have the same switch with the following ios version:

WS-C3560G-24TS     12.2(50)SE1           C3560-IPSERVICESK9-M

rtr is present in there.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

track num rtr missing

Hi Sergey,

This command is most probably replaced with the track number ip sla command, as the CLI has changed quite considerably regarding the RTR functionality (it is called IP SLA now). Try that out.

Best regards,

Peter

2 REPLIES
Cisco Employee

track num rtr missing

Hi Sergey,

This command is most probably replaced with the track number ip sla command, as the CLI has changed quite considerably regarding the RTR functionality (it is called IP SLA now). Try that out.

Best regards,

Peter

New Member

track num rtr missing

Hi Peter,

you are right. Thank you Cheers.

445
Views
0
Helpful
2
Replies
CreatePlease login to create content