Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Track status through SNMP

Hi!

Router checking availability host through track:

!

track 123 rtr 1 reachability

delay down 100

!

where

!

rtr 1

type echo protocol ipIcmpEcho XXX.XXX.XXX.XXX source-ipaddr YYY.YYY.YYY.YYY

rtr schedule 1 life forever start-time now

!

I can see following information from console:

router#sh track 123

Track 123

Response Time Reporter 1 reachability

Reachability is Up

33 changes, last change 20:14:15

Delay down 100 secs

Latest operation return code: OK

Latest RTT (millisecs) 144

Tracked by:

ROUTE-MAP 0

How can I see track status through SNMP?

regards

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Track status through SNMP

As far as I know there is no MIB for accessing object tracking via SNMP.

The best you can do access information about your Service Assurance Agent (SAA) / rtr job using the CISCO-RTTMON-MIB mib.

Use the following URL to see more about the CISCO-RTTMON-MIB in SNMP Object Navigator:

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1.3.6.1.4.1.9.9.42

2 REPLIES

Re: Track status through SNMP

As far as I know there is no MIB for accessing object tracking via SNMP.

The best you can do access information about your Service Assurance Agent (SAA) / rtr job using the CISCO-RTTMON-MIB mib.

Use the following URL to see more about the CISCO-RTTMON-MIB in SNMP Object Navigator:

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1.3.6.1.4.1.9.9.42

New Member

Re: Track status through SNMP

Thank you Graig!

It's usefull info! I have found required parametr:

.iso.org.dod.internet.private.enterprises.cisco.ciscoMgmt.ciscoRttMonMIB.ciscoRttMonObjects.rttMonCtrl.rttMonCtrlOperTable.rttMonCtrlOperEntry.rttMonCtrlOperTimeoutOccurred

.1.3.6.1.4.1.9.9.42.1.2.9.1.6

if false - then all ok

if true - host unreachable

659
Views
0
Helpful
2
Replies