Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

tracking and ip sla monitoring

Having a syntax issue, not sure about it.

#sh version

ROM: System Bootstrap, Version 15.0(1r)M6, RELEASE SOFTWARE (fc1)

System image file is "flash0:c2951-universalk9-mz.SPA.150-1.M3.bin"

ip sla monitor 1

brings back 'invalid input'... so "ip sla ?" only gives

"key-chain" and "responder" as options...

Also:

track 1 rtr 1 reachability

brings back 'invalid input'.... "track 1 ?" gives

"interface" "ip" "list" "stub-object"

I'm trying to create an sla monitor for failover.

track 1 rtr 1 reachability
delay down 15 up 10
!

ip sla monitor 1
type echo protocol ipIcmpEcho 1.1.1.1 source-interface ethernet0
timeout 1000
threshold 40
frequency 3

!

ip sla monitor schedule 1 life forever start-time now

Something like that....

It's a brand new 2951.

Any ideas?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: tracking and ip sla monitoring

Hi,

Check the license from your 'show ver' output;  IP SLA requires data license package.You need to buy the data license to active the feature. You can use  the evaluation license to test, but eventually you need the  license to active the feature.

http://www.cisco.com/en/US/docs/routers/access/sw_activation/SA_on_ISR.html#wp1097675

Regards,

Lei Tian

1 REPLY
Cisco Employee

Re: tracking and ip sla monitoring

Hi,

Check the license from your 'show ver' output;  IP SLA requires data license package.You need to buy the data license to active the feature. You can use  the evaluation license to test, but eventually you need the  license to active the feature.

http://www.cisco.com/en/US/docs/routers/access/sw_activation/SA_on_ISR.html#wp1097675

Regards,

Lei Tian

1844
Views
0
Helpful
1
Replies