Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

tracking object

Hi all

I use the tracking object feature with my ip route definition.

ex.: track 1 ip route 192.168.0.0 255.255.255.0 reachability

and: ip route 0.0.0.0 0.0.0.0 Ethernet 1 track 1

But before I use the tracking object I had the following default route

:ip route 0.0.0.0 0.0.0.0 Ethernet 1 DHCP

The problem is that I can't put both keyword. Only "Ethernet 1 DHCP" OR "Ethernet 1 track 1" but I need them both.

Is someone know why ?

Thank you very much

1 REPLY
Silver

Re: tracking object

Can you try to enter two commands w/ different keyword at the router ? I did not test it but it may work.

e.g.

ip route 0.0.0.0 0.0.0.0 Ethernet 1 DHCP

ip route 0.0.0.0 0.0.0.0 Ethernet 1 track 1

Check below link for more object tracking sampels.

http://www.cisco.com/en/US/products/sw/iosswrel/ps5413/products_feature_guide09186a00801d862d.html

Hope this helps.

118
Views
0
Helpful
1
Replies