Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Traffic of atm interface

Hi

I want to know which traffic(ip,tcp,udp etc.) utilizing atm interface(pvc) most or how much?

Regards

Om

4 REPLIES
Hall of Fame Super Gold

Re: Traffic of atm interface

For an accurate monitoring, try netflow

http://cisco.com/en/US/tech/tk812/tsd_technology_support_protocol_home.html

with an an external analyzer like PRTG.

For a poor man solution, configure access list with permit ip udo, etc. and do show to see the packet counters.

hope this helps, please rate post if it does!

Cisco Employee

Re: Traffic of atm interface

Hi,

you can also use NBAR protocol discovery to get an application level view at the traffic through an interface. Have a look at "Enabling Protocol Discovery"

http://www.cisco.com/en/US/products/ps6441/products_configuration_guide_chapter09186a008064fb50.html

Hope this helps! Please rate all posts.

Regards, Martin

New Member

Re: Traffic of atm interface

try AdventNet Netflow traffic analyser. easy to configure for a newbie.. and u can try it out for 30 days . it does NBAR protocol discovery too..

New Member

Re: Traffic of atm interface

Good..but i want the source ip and detination ip of the traffic .

117
Views
4
Helpful
4
Replies