Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Traffic/Service configuration for ISG

Need help in ISG configuration so that the following requirements should be met:

A set of target IP Addresses to be excluded in the traffic defined for a service (access to those IPs should be allowed, only that the traffic should not be qualified under service usage)

Please reply as quickly as possible since I urgently require this information.


New Member

Re: Traffic/Service configuration for ISG

To be more clearer on the query posted above, we have two services configured i.e. INTERNET & INTRANET. The question here is how to configure the IP traffic for a particular service i.e either for INTERNET or INTRANET service. To be more specific on the details:

We are using CISCO ISG as a gateway for both INTERNET and INTRANET access. We are having a separate billing server connected with AAA server. We are able to successfully bill the authenticated users when they are accessing the INTERNET service (for both prepaid and postpaid).

But our problem is when a user who is authenticated and is accessing the INTRANET pages, he getting charged for that service and amount is deducted from his/her account. To be precise over the solution required:

- Exclude the charging/billing for the user when he accesses INTRANET service.

- At the same time charge/bill him when he is accessing INTERNET service.

Any suggestions regarding CISCO ISG configuration in this regard for how to achieve the above requirement is highly apppreiciated.