12-13-2005 09:16 AM - edited 03-03-2019 11:13 AM
Hi,
I have configured traffic shaping on cisco 831; and I want to migrate to 871 router but the configuration don-t work proprely.
831 : config over 2 ethernets interfaces
config:interface Ethernet0
description line "Vers client"
ip address 84.78.03.17 255.255.255.252
ip access-group 102 in
traffic-shape rate 8000000 200000 200000 1000
no cdp enable
!
interface Ethernet1
description 'vers PAI'
ip address 56.45.66.79 255.255.255.240
ip access-group 102 in
duplex auto
traffic-shape rate 8000000 200000 200000 1000
no cdp enable
!
On 871 :
interface FastEthernet0
description ""Customer interface""
no ip address
!
interface FastEthernet1
no ip address
shutdown
!
interface FastEthernet2
no ip address
shutdown
!
interface FastEthernet3
no ip address
shutdown
!
interface FastEthernet4
description ""Wan interface""
ip address 84.81.96.68 255.255.255.240
duplex auto
speed auto
traffic-shape rate 32000000 800000 800000 1000
!
interface Vlan1
ip address 63.68.39.1 255.255.255.240
traffic-shape rate 32000000 800000 800000 1000
!
I want to have the traffic shapping on 2 fastethernets but the second is always on L2 mode and do not accept the traffic-shaping commande.
Help me to have a configuration solution to have policies in 2 fastethernets on the 871 as on router 831.
regards
Omar
12-19-2005 01:49 PM
I think you may be running to bug CSCdp96696
12-21-2005 02:45 AM
thanks but I can display this bug
bests regards
Omar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide