Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Traffic shaping for IP

Scenario, ASA has one IP assigned to a network for PAT, customer wants to limit the amount of bandwidth users can use on the router.

So create ACL extended, host IP to any

Create Class-map

match access-group for ACL

Create Policy-map

class Class-Map

shape average percent 25

Apply  to outgoing WAN connection.

Will this work provided the outgoing interface bandwidth setting is equal to the actual WAN speed for that single IP and allow all the rest of the IP's full bandwidth?

2 REPLIES
New Member

Re:Traffic shaping for IP

There is a default traffic class on the router. Create a policy map and call the class-default. Then apply the shaping policy to that class and then apply that policy map to the interface using the service policy command.


Sent from Cisco Technical Support Android App

New Member

Re:Traffic shaping for IP

How do I single out the one IP from the /26 to apply the shaping to just that address, and not shape all the rest?

94
Views
0
Helpful
2
Replies
CreatePlease to create content