Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Traffic-shaping per vlan on 3550/3750

Hi,

I have a hub and spoke network with layer3 switches.The spoke sites (6 in no.) are classified on per vlan basis, and rate-limited on wan side for 6 Mb traffic.The wan is Ethernet over SDH.The hub site trunk is 100 Mb.I want the Traffic on the hub site to be limited to 6 Mb per Vlan ,so that Spokes should not be able to attract bursty traffic and face a packet drop at SDH(return-Path).

Can i do traffic-shaping on Cisco3550/3750.If yes, what IOS and commands.Further what impact it may have on memory and processor utilization?What other best ways to rate-limit on 3550/3750 are there?

1 REPLY
Blue

Re: Traffic-shaping per vlan on 3550/3750

If you want traffic shaping you would need the 3750 Metro version. The standard 3750 and 3550 can only do policing.

http://www.cisco.com/en/US/products/hw/switches/ps5532/products_white_paper09186a00801eb831.shtml

527
Views
0
Helpful
1
Replies