I am embarking on a totally-new-to-me project, a transport network. I got the sample network diagram attached. In the diagram, all stations will be interconnected via a Cisco 3560C which all points back to the HQ. IP addressing scheme is as such. I am also aware of the IP Base image this switch comes with, limited to only 1 area of OSPFv2 or v3. The fiber interconnects are single-mode using DWDM, i.e. different transmit and receive frequencies. First of all, in design spec wise, will this be a validated design given the budget as such, only the devices in the diagram are used and cannot be changed.
Hi Leo, Thanks for replying. the number of stations is correct for the moment, with expansion along the way couple of years down the road. There could be multiple networks connecting to each station but this has not been firmed up yet as well. If there is a network (172.16.x.x) coming in, i guess routing would be involved.
Hi Leo, I understand that there is a limit for L2 ethernet in that the maximum hop is 4? Looks like L3 with OSPF for routed access is sufficient? The stations are all interconnected with single-mode DWDM single core.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.