Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

transput input all command reappear after router rebooted

Hi

 

I have 1941 .i have removed transport input all command and configure transport input none

 

My router rebooted and after that transport input all reappear in the config.below is existing line config and Please advise

 

RAK-ICELAND-ATM uptime is 13 hours, 29 minutes
System returned to ROM by power-on
System restarted at 22:09:49 GMT Sun Sep 28 2014
System image file is "flash0:c1900-universalk9-mz.SPA.151-4.M2.bin"
Last reload type: Normal Reload\

 

!
line con 0
 exec-timeout 15 0
 password 7 <removed>
 authorization commands 1 net-supp
 authorization commands 15 net-supp
 authorization exec net-supp
 accounting commands 1 net-supp
 accounting commands 15 net-supp
 accounting exec net-supp
 login authentication con
 transport output none
line aux 0
 no exec
 transport output none
line 2
 no activation-character
 no exec
 transport preferred none
 transport output none
 stopbits 1
line vty 0 4
 access-class ACCESS in
 exec-timeout 15 0
 password 7 <removed>
 authorization commands 1 net-supp
 authorization commands 15 net-supp
 authorization exec net-supp
 accounting connection net-supp
 accounting commands 1 net-supp
 accounting commands 15 net-supp
 accounting exec net-supp
 login authentication vty
 transport input all
 transport output none
line vty 5 15
 access-class ACCESS in
 exec-timeout 15 0
 authorization commands 1 net-supp
 authorization commands 15 net-supp
 accounting connection net-supp
 accounting commands 1 net-supp
 accounting commands 15 net-supp
 accounting exec net-supp
 login authentication vty
 transport input all
 transport output none
!

1 REPLY
New Member

Check this bughttps://tools

Check this bug

https://tools.cisco.com/bugsearch/bug/CSCtx96997

 

Fixed in 15.1(4)M5

89
Views
0
Helpful
1
Replies