What's the best way to troubleshoot lag? Our main router that connects our sites is giving ping times from the inside of 300ms. The processor is at 5%, and the memory stats are fine (about 40% free). The tx and rx is about 50/255 (or about 20%). Telnetting into the router is slow.
Assuming that you would be going through a provider for connectivity between main router and sites.
1) Find RTT from main router to sites
2) Find RTT from sites to main router.
Again, if you have a monitoring tool in place, a baseline generated would give an idea of what the normal RTT should have been (before the problem). It should also indicate any packet losses. With these results in hand you could go back to the provider.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...