Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Trying to get a DS3 circuit on a GSR12000 to connect to a Nortel SR 4134

Has anyone accomplished this. The code version of 10.1 on the Nortel device does not allow me to change the DSU settings or scramble. I have tried all combination on the Cisco side. Any help would be apprecciated.

Thanks

Steve

1 REPLY
Hall of Fame Super Silver

Re: Trying to get a DS3 circuit on a GSR12000 to connect to a No

Hello Steve,

this can help you:

http://www142.nortelnetworks.com/techdocs/SR4134_10.1/pdf/NN47263-301_02.01_INS.pdf

it tells to use only the default framing of C-bit because the interface doesn't support M13 framing format

So try to configure the GSR's DS3 accordingly.

Hope to help

Giuseppe

109
Views
0
Helpful
1
Replies
CreatePlease to create content