Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

tunnel interface and service policy - shutdown line protocol

My router :

Cisco 2821 (revision 53.51) with 239616K/22528K bytes of memory.

System image file is "flash:c2800nm-advipservicesk9-mz.124-24.T8.bin"

turn on the service policy, line protocol is disabled

Config:

interface Tunnel10

description #To TEK-XXXXX-RTR01#

bandwidth 128

ip address 10.3.170.1 255.255.255.252

ip accounting output-packets

ip mtu 1500

keepalive 10 3

tunnel source GigabitEthernet0/0

tunnel destination 10.5.0.114

tunnel bandwidth transmit 128

tunnel bandwidth receive 128

!

policy-map sector

class voice

  set ip precedence 5

    priority 32

class SAP

  set precedence 4

    bandwidth 56

class Lotus

  set precedence 3

    bandwidth 16

    shape average 16000

class Internet

  set precedence 2

    bandwidth 8

    shape average 8000

class class-default

  set precedence 1

    bandwidth 16

policy-map center-to-sector

class class-default

    shape average 128000

  service-policy sector

Please help us to sort out this problem

2 REPLIES
Hall of Fame Super Silver

tunnel interface and service policy - shutdown line protocol

You have showed the maps of how the various classes are controlled but not shown us how the classes are identified and defined. So we can not tell where the tunnel keepalive traffic fits into your classification. My guess is that your service-policy is dropping at least some of the tunnel keepalive packets and that takes the line protocol down.

HTH

Rick

New Member

tunnel interface and service policy - shutdown line protocol

class-map match-any ID

match access-group name ID

class-map match-any Internet

match access-group name proxy

class-map match-any SAP

match protocol icmp

match protocol secure-telnet

match access-group name ip_sap

match protocol dns

match access-group name voice

match access-group name ccm

match protocol citrix

class-map match-any Lotus

match protocol notes

match access-group name lotus

class-map match-any voice

match protocol mgcp

match protocol sip

match protocol skinny

match protocol rtcp

match protocol h323

match  dscp 42

match ip dscp cs5

match  precedence 5

match  dscp af11

match  dscp ef

match protocol rtp audio

match protocol rtp video

175
Views
0
Helpful
2
Replies
CreatePlease login to create content