The red computer generates custom UDP packets which I'd like to receive at a)another computer that is located in the same LAN and b)computer with static IP address that is located in Internet. 192.168.1.1 is 1812 router.
Is it possible to make a tunnel in router with several destinations, so I could send these packets for example to 192.168.1.10 and these packets would be retransmitted to 192.168.1.3 in the LAN and their duplicate would be retransmitted to 126.96.36.199 in the Internet?
I know there's a multicast stuff, but I have only two predefined clients with known IPs and I don't need more. Also I'd like to avoid generating two UDP packets at once for two destinations.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...