03-29-2010 02:57 AM - edited 03-04-2019 07:57 AM
Dear All,
I need to implement Turbo ACL on 2811 router.
I tried to enable it by using access-list compiled command but it is not listing the compiled option under access-list command.
I have checked the Cisco docs and IOC command look-up too.
Current IOS in the router is Version 12.4(15)XZ (C2800NM-IPVOICEK9-M).
Kindly help..
Thanks,
Nitin
Solved! Go to Solution.
03-29-2010 09:41 AM
Turbo ACLs was an option, default is on, in Pix version 6.3.x but no longer available in version 7.x and 8.x
03-29-2010 03:26 AM
Hello Nitin,
I see the compiled option on following device:
sh ver | inc image
System image file is "flash:c2800nm-adventerprisek9-mz.124-7a.bin"
access-list compiled ?
reuse Reuse tables when compiling (for reduced memory requirements)
it may be a question of feature set. I don't see the option on a C3825 with SP feature set
sh ver | inc image
System image file is "flash:c3825-spservicesk9-mz.124-24.T.bin"
Hope to help
Giuseppe
03-29-2010 03:39 AM
Thanks Giuseppe,
I think due to voice feature image on the router it is not lisiting the command. i'll make an image upgradation.
I am not able to get the command on PIX/ASA also. Would be appreciated if you please check the same command availability on PIX/ASA with image release 7.2 or later.
Thanks,
Nitin
03-29-2010 05:58 AM
Hello Nitin,
I'm not an expert of ASA/PIX but I think that turbo ACL is not supported over these firewalls
see config guide for ASA 7.2
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/traffic.html
I don't see mention of turbo ACL
firewalls need to inspect deeply packets so probably turbo acceleration is not an option
Hope to help
Giuseppe
03-29-2010 09:41 AM
Turbo ACLs was an option, default is on, in Pix version 6.3.x but no longer available in version 7.x and 8.x
03-29-2010 11:45 AM
Turbo ACL for ASA 7.x and beyond is enabled by default.
Regards,
jerry
Cisco will donate $1 to the American Red Cross Haiti fund every rated post.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide