Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Turn down a Dialer profile

Hi!

I want to set down a dialer profile when this connection fail. Default route is via this dialer and I set another one via ethernet with a metric of 200 but dialer is always up (spoofing). Somebody know how can turn down automaticaly dialer?

I try with keepalive command but without results.

Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Turn down a Dialer profile

Hello David,

Designing a backup for dialer link is always a tricky as dialer link is always up/up spoofing.

Cisco have a new feature called "object tracking".

I found following link that will help you. I hope you have the right ios

http://www.cisco.com/en/US/products/sw/iosswrel/ps5413/products_feature_guide09186a00801d862d.html

I have never tested it but seems a great way to fix the dsl with dialer interface.

HTH, please rate if so

cisand

4 REPLIES
New Member

Re: Turn down a Dialer profile

hello David,

shouldn't you configure the static route other way around ?

isn't the ethernet primary and Dialer back up ?

if not, can you send config ?

HTH,

cisand

New Member

Re: Turn down a Dialer profile

The primary line is Dialer and has default route

ip route 0.0.0.0 0.0.0.0 Dialer1

Then when dialer disconnect i want that traffic goes via another router that is in lan

ip route 0.0.0.0 0.0.0.0 ethernet0 192.168.0.1 200

but dialer is still up because is in spoofing mode and then the first route not disappear.

There are some way to shutdown dialer automaticaly?

I can´t use dynamic route protocols because i dont have control of the other side.

New Member

Re: Turn down a Dialer profile

Hello David,

Designing a backup for dialer link is always a tricky as dialer link is always up/up spoofing.

Cisco have a new feature called "object tracking".

I found following link that will help you. I hope you have the right ios

http://www.cisco.com/en/US/products/sw/iosswrel/ps5413/products_feature_guide09186a00801d862d.html

I have never tested it but seems a great way to fix the dsl with dialer interface.

HTH, please rate if so

cisand

New Member

Re: Turn down a Dialer profile

Yes, i discover it yesterday and i´m testing.

Thanks

132
Views
0
Helpful
4
Replies
CreatePlease login to create content