In what interface is it recommended to increase the delay (to make a route less desirable), the real physical interface which is a serial interface connected to the internet or the actual GRE Tunnel that is derived from the physical interface? Running EIGRP over GRE, thanks to all.
I feel it has to be configured on GRE tunnel interface to make route via that interface less preferrable. There can be multiple GRE tunnels built over serial interface going to different locations. if it will be configured on seial interface then it will make route less preferrable for all those locations.
A routing protocol always includes the cost of the interface via which the update is sent or received . Here even though the traffic is sent via serial link , but eigrp is run over the GRE tunnel , so manipulating the delay or bw on tunnel would be fine.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...