Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Two diferent route with a same destiny

I wish to put two routes different towards a same destiny in the router.

if one of these routes fails the other it works?

As I determine the priority between these routes ?

Greetings

4 REPLIES

Re: Two diferent route with a same destiny

Hi

It would be helpful if you provide the IP Schema for a better understanding....

Regards

JD

Re: Two diferent route with a same destiny

Hi ,

You can have two routes for the same destination if you have two outbound interfaces .

You can set the priority for the two routes by setting a diff metric for the two routes.

eg :

ip route x.x.x.x mask s0

ip route x.x.x.x mask s1 200 --- Secondry route

Hope this helps

regards

vanesh k

Re: Two diferent route with a same destiny

Hi,

as suggested in earlier post, you can configure floatic static routes for this.

ip route 0.0.0.0 0.0.0.0 s0/0

ip route 0.0.0.0 0.0.0.0 s0/1 200

since administrativr distance of route via s0/1 is higher than the administrative distance of route via s0/0, route via s0/0 will be installed in the routing table. If interface s/0 goes down, routing table will install route via s0/1 and vice-versa.

hope it helps .... rate if it does ....

New Member

Re: Two diferent route with a same destiny

Thank you very much

127
Views
0
Helpful
4
Replies