Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Two ISP to single Router

How to connect Two ISP to single Router and configuration???

1 ACCEPTED SOLUTION

Accepted Solutions

Hey Ganesh,You may use any

Hey Ganesh,

You may use any protocol, however first check with your service providers about which protocol they are using.

However most of times itsBGP, so here is a good documentation for same:

http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/23675-27.html

HTH.

Regards,

RS

4 REPLIES

Hey Ganesh,You may use any

Hey Ganesh,

You may use any protocol, however first check with your service providers about which protocol they are using.

However most of times itsBGP, so here is a good documentation for same:

http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/23675-27.html

HTH.

Regards,

RS

Thank you 

Thank you 

Cheers :)Regards,RS

Cheers :)

Regards,
RS

Silver

can you elaborate the purpose

can you elaborate the purpose of this yes BGP is usually used or if you just want to use the link for internet trafiic and load balancing you can use the ip sla with track option to achieve this .

41
Views
0
Helpful
4
Replies