Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

two summarize routes

Dear support guys,

Can we advertise only the two summarize routes 10.8.0.0/16 and 10.4.0.0/16 on our CISCO routers which are connected to our collabarative network?

5 REPLIES

Re: two summarize routes

Hi,

It is important to know where you are summarizing the routes in the Network and in which routing protocol you are running ??

New Member

Re: two summarize routes

We are running OSPF routing protocol and we want to configure this on our perimeter devices which are connected to our collabarative network.

New Member

Re: two summarize routes

Please answer my question

Re: two summarize routes

Yes it is possible, provided you are aware of the collaborative network address space.

I mean to say , there are no discontigeous subnets/address space.

Bronze

Re: two summarize routes

You must also do this on an ABR when summarizing between areas.

You can use the area range command to summarize between areas

Use the summary-address command if you are summarizing outside OSPF or within a different process

http://www.cisco.com/en/US/tech/tk365/technologies_white_paper09186a0080094e9e.shtml#t28

121
Views
0
Helpful
5
Replies
CreatePlease to create content