Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Two table routing on VXR

Can I configure 7206vxr to have two independent routing table.

First for BGP and second for LAN traffic.

(7206vxr devided to two virtual devices)

I haven't got MPLS.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Two table routing on VXR

That is VRF-lite. Please search for this term on CCO. Most of the documentation you will find is relative to L3 switches, but it can be done on routers too. Note that many cases can be resolved also with policy routing.

Hope this helps, please rate post if it does!

1 REPLY
Hall of Fame Super Gold

Re: Two table routing on VXR

That is VRF-lite. Please search for this term on CCO. Most of the documentation you will find is relative to L3 switches, but it can be done on routers too. Note that many cases can be resolved also with policy routing.

Hope this helps, please rate post if it does!

111
Views
0
Helpful
1
Replies