Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

TXload is 255/255 with simple ping Traffic

I have Multilink setup with 2 combined T1 circuits, one at Site A and one at Site B.

When I perform a simple ping from site A to site B the ping is fine and the TXload and RXload are normal.

When I perform a simple ping from Site B to site A the TXload is 255/255 on a Multilink interface that is two T1's combined.

Any ideas on why the TXload is showing fully saturated (255/255) even though i am performing a simple ping?

Thanks,

Desmond

4 REPLIES
New Member

Re: TXload is 255/255 with simple ping Traffic

Post your show int output for that interface

Sent from Cisco Technical Support iPad App

New Member

Re: TXload is 255/255 with simple ping Traffic

Any error on the T1 card?

Sent from Cisco Technical Support iPhone App

Cisco Employee

TXload is 255/255 with simple ping Traffic

What is the box and version?

Recently I remember seeing a similar issue.

-Nagendra

New Member

TXload is 255/255 with simple ping Traffic

what is the transfer rate when you pinging ?? is it  3 Mbps + ?

405
Views
0
Helpful
4
Replies
CreatePlease login to create content