i am facing typical problem with ISDN connectivity my remote location (1751) is having ISDN BRI connectivity and this location is dialing on my center location router(7513) which is having PRI, the connection is established my remote location is able to access the application server.
but problem is that i am not able to ping this remote location when i am pinging it through central location router but i am able to ping when i am pinging it through command prompt
remote users are not facing any problem they are accessing the servers
This problem may arise b'coz of Time To Live of packets.
When u ping the remote side,there is time-out(for eg.in cisco is 2ms)for each packet after which the router will send another packet.If the packet dosn't come back in stipulated time,it will show time-out.
In PC this time is much greater then router, hence u will get the reply.
You may check my theory by freeing up the link,that is disconnecting the users and letting the link free,then pinging,you must get the reply.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...