Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UBR License Conflict

I can't load a permanent license as an evaluation license is already in place. Clearing of the evaluation license fails. Any ideas on how to remove the eval lic?

uBR10K#license clear DS_License subslot 7/0                   

Feature: DS_License

    1   License Type: Permanent

        License State: Active, In Use

        License Addition: Exclusive

        License Count: 5

        Comment:

        Store Index: 1

        Store Name: Primary License Storage

Are you sure you want to clear? (yes/[no]): yes

% Error: Could not delete in-use license

uBR10K#license clear US_License subslot 7/0

Feature: US_License

    1   License Type: Permanent

        License State: Active, In Use

        License Addition: Exclusive

        License Count: 20

        Comment:

        Store Index: 0

        Store Name: Primary License Storage

Are you sure you want to clear? (yes/[no]): yes

% Error: Could not delete in-use license

uBR10K#show license detail subslot 7/0

Index: 1        Feature: DS_License                        Version: 1.0

        License Type: Permanent

        License State: Active, In Use

        License Count: 5/5/0  (Active/In-use/Violation)

        License Priority: Medium

        Store Index: 1

        Store Name: Primary License Storage

Index: 2        Feature: DS_License                        Version: 1.0

        License Type: Evaluation

        License State: Inactive

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 4  days

        License Count: 20/0/0  (Active/In-use/Violation)

        License Priority: None

        Store Index: 1

       Store Name: Evaluation License Storage

Index: 3        Feature: US_License                        Version: 1.0

        License Type: Permanent

        License State: Active, In Use

        License Count: 20/20/0  (Active/In-use/Violation)

        License Priority: Medium

        Store Index: 0

        Store Name: Primary License Storage

Index: 4        Feature: US_License                        Version: 1.0

        License Type: Evaluation

        License State: Inactive

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 4  days

        License Count: 20/0/0  (Active/In-use/Violation)

        License Priority: None

        Store Index: 0

        Store Name: Evaluation License Storage

Everyone's tags (2)
2 REPLIES

Re:UBR License Conflict

Looks like it won't remove the license since you have features configured that are using that license. You will need to remove the configuration that's using the license, remove the eval license, install the perm license, and add the configuration back in.

Regards,
Mike


Sent from Cisco Technical Support Android App

New Member

UBR License Conflict

We have tried to remove the Evaluation license but recieved an error. Is it possible to remove the license while this unit is in a production enviornment? Is there anyway to leave the config in place?

Error output:

uBR10K(config)#license feature evaluation disable DS_License subslot 7/0

        Feature: DS_License   Version: 1.0

Index: 1        License Type: Evaluation

        Lock Type: Not Locked

        License Count: 20

        License Priority: Low

% Error:  License priority modification failed: Selected license line's precedence is in incorrect state

246
Views
0
Helpful
2
Replies