Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

UDLD

From the following extract from a SHOW INTERFACE command which of the options is/are true:

0 packets input, 0 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

0 input packets with dribble condition detected

2 packets output, 120 bytes, 0 underruns

2 output errors, 0 collisions, 0 interface resets

0 babbles, 0 late collision, 0 deferred

2 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out

The interface is disabled

The connected system is not transmitting

The interface is broken

The interface is disconnected

The interface is UDLD disbaled

1 REPLY

Re: UDLD

The connected system is not transmitting

should be right one because output says 0 packets input, 0 bytes, 0 no buffer while 2 packets output, 120 bytes

155
Views
0
Helpful
1
Replies
CreatePlease login to create content