cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
258
Views
0
Helpful
1
Replies

UDLD

CSCO10320953
Level 1
Level 1

From the following extract from a SHOW INTERFACE command which of the options is/are true:

0 packets input, 0 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

0 input packets with dribble condition detected

2 packets output, 120 bytes, 0 underruns

2 output errors, 0 collisions, 0 interface resets

0 babbles, 0 late collision, 0 deferred

2 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out

The interface is disabled

The connected system is not transmitting

The interface is broken

The interface is disconnected

The interface is UDLD disbaled

1 Reply 1

sourabhagarwal
Level 4
Level 4

The connected system is not transmitting

should be right one because output says 0 packets input, 0 bytes, 0 no buffer while 2 packets output, 120 bytes

Review Cisco Networking products for a $25 gift card