Unable establish ADSL connection with Cisco 837 router
Im not having much luck confiruing my 837 ADSL router. The router get a dynamic IP from ISP.
Below is my configs, appreciate if some one can give me some tips:
hostname Router1 ! ip subnet-zero no ip routing no ip domain lookup ip domain name cisco.com ! interface Ethernet0 description Connect to internal network ip address 18.104.22.168 255.255.255.252 no ip route-cache hold-queue 100 out ! interface ATM0 no ip address no ip route-cache no atm ilmi-keepalive pvc 8/35 encapsulation aal5snap ! dialer pool 1 dialer-group 1 ppp authentication chap callin ppp chap hostname <removed> ppp chap password <removed> ppp ipcp dns request ! ip nat inside source list 1 interface Dialer0 overload ip classless ip route 22.214.171.124 255.255.255.0 126.96.36.199 ip http server no ip http secure-server ! access-list 1 permit any dialer-list 1 protocol ip permit ! end
Router1#show ip interface ATM0 is down, line protocol is down Internet protocol processing disabled Dialer0 is up, line protocol is up Internet address will be negotiated using IPCP Ethernet0 is up, line protocol is up
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...