Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Unable to boot Cisco 1721 Router

Hi All,

I have one Cisco 1721 which was working fine w/o any problem. But some days back due to unable to recall password being set into it, I just booted the Router with pressing Ctrl + Break key to go to rommon prompt, but it gets hanged.

Then I started the Router again, it never come up and even tried again with Ctrl + Break key, nothing comes into the console screen.

Appreciate if someone help me to make this Router bootable?

Regards,

Suresh Shrestha

3 REPLIES
Silver

Re: Unable to boot Cisco 1721 Router

Hi Suresh,

Whether you are not able to see anything on the console or u r getting any o/p.

What is the LED status of the ports?? Showing up or down!

Rgs

New Member

Re: Unable to boot Cisco 1721 Router

Hi Balaji,

I can not see anything on the console at all.

LED I can see PWR & OK (Green). No other LEDs lighted.

Regards,

Suresh

Silver

Re: Unable to boot Cisco 1721 Router

Hi Suresh ,

Connect console cable to router and Try out with verious baud rates starting from min.value ...

At one point u should be able to access the router.

configuration register value may not be 0x2102 when you attempted to enter into rommon mode.

Thanks,

satish

220
Views
0
Helpful
3
Replies
CreatePlease to create content