Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

unable to copy run FTP (VRF Aware)

                   my interface is in a specific VRF

interface Loopbackx

  ip vrf forwarding  MGMTxxx

ip address xxxxxxxxxx

and the global comand

ip tftp source-interface Loopbackx is also enable

the problem is

though I can ping to the ftp server

and I can telnet to the ftp server using port 21

I am not able to copy run tftp/....../sublocation/

any help is apreciated

3 REPLIES

Re: unable to copy run FTP (VRF Aware)

Hello.

you are copying file via FTP, but configured source-interface for TFTP.

If the guess is wrong, could you please share your configuration and failed attempt output?

PS: FTP is using TCP 21/20, TFTP is using UDP 69. Btw, you might need to configure FTP as passive (ip ftp passive) to use TCP 21 only, because TCP20 could be blocked somewhere.

Re: unable to copy run FTP (VRF Aware)

Hello

On the source router is tftp or FTP enabled?

Tftp server xxxxx

Ip ftp username xxxx
ip ftp password xxx
ip ftp passive
ip ftp source-interface xxx


Res
Paul

Sent from Cisco Technical Support iPad App

Please don't forget to rate any posts that have been helpful. Thanks.
New Member

i tried

i tried

copy ftp://username:password@1.1.1.1 bootflash:  vrf <vrf name>

and it worked on 4500 switch

455
Views
0
Helpful
3
Replies