Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unable to define voice-port on 2811 SRST router

I have installed a NM-4B-S/T= 4 Port BRI interface and am trying to configure 4 voice ports on the 2811 SRST router. The ios will not allow me to define the voice ports.

The interfaces show as Bri1/0, bri1/1, bri1/2 and bri1/3.

How do I get the 2811 to use these as voice ports?

1 REPLY

Re: Unable to define voice-port on 2811 SRST router

router#clear interface bri0/0

!

network-clock-participate wic 0

!

interface bri 0/0

isdn switch-type basic-net3

isdn overlap-receiving

isdn incoming-voice voice

isdn protocol-emulate user

where the wic [ur slot number]

if helpful Rate

134
Views
0
Helpful
1
Replies