Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unable to Logon Cisco 2620 Router

I have configured cisco 2620 router through hyperterminal at the time of configuring i put the password "cisco".

Today i have installed Cisco Configmaker. There is one option called Autodetect device wizard in Cisco config maker. I have clicked on that option and its automatically configured the device.

When i try to logon through hyperterminal as usual it asked me to enter the password when i put the password "cisco" its not accepting.

Then again i logon to ciscoconfig maker and typed "cisco" its not accepting

I have not changed the password atall. Please see the attachment.

Can anyone advice what to do or how do i reset the password.

Thanks

3 REPLIES

Re: Unable to Logon Cisco 2620 Router

Use this link to reset password on the router.

http://www.cisco.com/warp/public/474/pswdrec_2600.shtml

New Member

Re: Unable to Logon Cisco 2620 Router

Bit triky specially in breaking key sequence. eventually come to rommon1> command after pressing space bar for 10-15 times.

Thank uou very much thisisshanky my problem solved

Re: Unable to Logon Cisco 2620 Router

Yes its a bit tricky , but you will get the feel of it after the first few times. Especially do not forget copying back the startup config back to running config so that you dont lose the configs.

284
Views
5
Helpful
3
Replies