I'm trying to recover the password on a 2514 router in my lab at school. During boot I was only seeing what looked like encrypted data, and unable to get a break at a braud rate of 9600. When switched to 2400 braud rate, was finally able to read data and insert break. The confige register is 0xffff3902, when try to change it ask for cirfirm y/n. type y or yes and it won't change. any suggestions Thanks RS
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...