Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Uncompressed configuration from 52150 bytes to 201331 bytes

Hi

Can you tell me what I do for resolve this issue (See attach).

thanks

1 REPLY
Hall of Fame Super Silver

Re: Uncompressed configuration from 52150 bytes to 201331 bytes

Hello Youssef,

>> *Mar 6 19:51:30.647: %SYS-2-MALLOCFAIL: Memory allocation of 65536 bytes failed from 0x60028810, alignment 0

Pool: Processor Free: 26740 Cause: Not enough free memory

Alternate Pool: None Free: 0 Cause: No Alternate pool

This router has run out of available memory you can check this with

sh proc mem | inc Free

It happened during an attempt to provide memory to EIGRP protocol dependent module PDM.

You have only 128 MB on the device depending on IOS version in use and on features configured this can be not enough.

Schedule a reload and monitor if free memory is reducing over time this can be a sign of a software defect that causes memory leakage.

If this is the case memory size can be enough and you should upgrade to another IOS version in the hope that the problem is fixed.

Hope to help

Giuseppe

701
Views
0
Helpful
1
Replies